Please read and understand this entire manual before attempting to assemble, operate or install the product.
Product must be installed by a qualified electrician!
- Shut off power at the circuit breaker or fuse panel before removing the old fixture or installing the new one.
- LED electronics can be damaged by electrostatic discharge (ESD) shock.Before installation, discharge yourself by touching a grounded bare metal surface to remove this hazard.
- To avoid damage, do not remove the clear lens over the LED module.
DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT.
If you currently have dimmer controls, you will need to remove them and replace them with regular electrical switches. If you have a three-way dimmer, you will have to replace it with a regular three-way switch. If you are unfamiliar with electrical installations, it is recommended you have a qualified electrician do your installation.
- Power: AC120V;
- Output: 39W±10%;
- Detection Range: 0-15M /180°;
- Delay Time: Test/30/60/120S;
- LED: SMD 2835 66PCS 1W;
- CRI:＞70 PF＞0.6;
- Lumen: 3000LM±10%;
- Color Temperature:5500-6500K;
- Material: PC+Aluminum;
- Available Color: Gray White.
【NOTICED】: At an ambient temperature of 25℃ , the detection distance is at max.As the temperature increases or decreases, the detection distance will be affected.
【QUICK AND SIMPLE INSTALLATION】: The installation is very easy, hook up is a breeze, even for a DIY’er. This LED outdoor security light can be installed by mounting to a wall and following a few simple wiring steps.
【BRING SAFETY TO YOUR HOME】: Our LED Security lights can turn on automatically when the motion is detected with 180 degrees swiveling angle, sensing light levels and motion up to max 49 feet. Easily adjust the light heads, lens hoods and motion sensor to different angle based on your DIY requirement.
【IP65 WATERPROOF】: The durable and weatherproof design ensures safety for outdoor use protecting lamp from rain, sleet or snow. Perfect lighting solution for garages, workshops, industrial workstations, storage rooms, equipment rooms, etc.
[TWO MODES]:“Motion-sensing Mode”：In the “motion-sensing mode”,the switch shows 30s,60s and 120s as the lighting time, but it doesn’t light up during the day, except for the “test “,the lights in “test ” can glow during the day, but only 6s.”Manual Mode”：Please make sure the lights in “test ” and the power is switched on. And simply switch OFF and ON twice within six seconds. The lights will now stay on permanently.Aslo the motion sensor will not start.